Solar Traker Linear Actuator Stroke 800mm

Contact Supplier

Product Images of Solar Traker Linear Actuator Stroke 800mm

Solar Traker Linear Actuator Stroke 800mm
Solar Traker Linear Actuator Stroke 800mm pictures & photos
Solar Traker Linear Actuator Stroke 800mm
  • Solar Traker Linear Actuator Stroke 800mm
  • Solar Traker Linear Actuator Stroke 800mm
    Solar Traker Linear Actuator Stroke 800mm

Find Similar Products

Product Description

HB-DJ817G is heavy load design with ball screw high precision performance special for solar tracking use in hash envioements
Solar Traker Linear Actuator Stroke 800mm
PLS Know it is customized product ,stroke ,install size ,speed ,motor etc.can be change according to cutomer requiement

  There are 3 install method as following:
Solar Traker Linear Actuator Stroke 800mmFeatures:
    Solar tracking system linear actuator dynamic Load 20000N,static load 60000N for centralized solar power plant, IP66 electric actuators with the capacity for massive wind and snow loads,24V DC  motor  Ball Screw type outdoor use  Linear Actuator for Photovoltaic power station

1,Support DC permanent magnet brushed motor.                                
     2,Power supply voltage: 24 v.                                
     3,Speed range: 1-1.6mm/s.                                
     4 ,  Max load:  20000 N.                                
     5,Applicable temperature: - 40 ºC - 65 ºC,
     6, Duty cycle : 50% at normal temperature.                                
     7,Signal feedback: Hall(Optional).                                
    8,External Hall switch, adjustable stroke, reliable control.                                
     9,IP66 protection Grade for outdoor use.                                
    10,Long life high efficiency designed  ball screw.                                
    11,High weather resistance bellows (Optional).   
1-1 Transmission parameters of the codes
Code VDC No-load speed
mm/s
No-load Current
A
Load(push/pull)KN Speed with load
mm/s
Current with load
A
single hall       pulse/m
1 pairs of poles 4 pairs of poles
A 24V 1.6 1.3 20 1.3 3.6 25.2 100.8
B 24V 1.2 1.3 20 1 4 37.998 151.992
2-1 Product Selection Guide
                   
Voltage Speed   Stroke Install
Dimension
Rated
Load
Front
end
Rear
End
Cable
Lenth
Cable
end
Hall
24VDC                  
1.2mm/s                
1.6mm/s                
150mm-1200mm                
L(See 4-1,4-2)          
20000N          
∅25 rod end knuckle bearing                
customize      
See 4-1,4-2      
1M                  
1.5M    
2M    
customize    
Bonding tin bare wire(can customize connectors )  
No hall sensor
2 hall sensors
 Solar Traker Linear Actuator Stroke 800mm
Main test items and reference standards
No. Test items Standards Notes
1 Simulated load life test HB FACTORY STANDARD 20KN load, stroke 1m, duty cycle 30%,  life test
2 Temperature cycling test IEC60068-2-14 Low temperature: - 40 ºC± 2 ºC, high temperature: 65 ºC± 2 ºC, high and low temperature for 1 hour, 50 cycle times, full load.
3 Temperature shock test IEC60068-2-14 Low temperature: - 40 ºC± 2 ºC, high temperature: 65 ºC± 2 ºC, 100 cycles.
4 Humidity storage test IEC60068-2-3 Temperature 65 ºC± 2 ºC, temperature 95 ± 2% RH, 144H
5 High temperature operation test IEC60068-2-2 High temperature 65 ºC, load test
6 Low temperature test IEC60068-2-1 (- 40 ºC± 2 ºC) storage time 48 hours; full load operation
7 Mechanical vibration test IEC60068-2-6 Sine wave, 10Hz ~ 200Hz (logarithmic sweep) scanning cycle 300s, test time 8h
8 Salt spray test GB/T242317-2001 The appearance salt spray test needs more than 500h (NSS)
9 Protection level test GB4208-93 The waterproof test box shall be used according to gb4208-930 standard of shell protection grade
10 Static load test HB FACTORY STANDARD Use pressure sensor, industrial computer, cylinder test.
11 Cable thermal aging GB2951.11-2008 The change of tensile strength and elongation is less than 15%
12 Low temperature winding of cable GB2951.14-2008 (
8.1)
(- 40 ºC), 4h after immersion in water 1000VAC / 5m, no breakdown
13 UV resistant TOV2pfg1169-2007 60 ± 2W / m2, 300-400nm, 720h ,no crack
 

Why use linear actuator for solar tracking system
1.Cost is lower (not only  for the metal structure ,the linear actuator,and also the install labor cost etc.)
2. easy to maintain, install, and replace,no need to remove any of the panels if need to replace
3. triangular structure is more stronger than slew drive , no need damper as slew drive
    
Solar Traker Linear Actuator Stroke 800mmSolar Traker Linear Actuator Stroke 800mm
Solar Traker Linear Actuator Stroke 800mm
Solar Traker Linear Actuator Stroke 800mm

Solar Traker Linear Actuator Stroke 800mmSolar Traker Linear Actuator Stroke 800mmSolar Traker Linear Actuator Stroke 800mmSolar Traker Linear Actuator Stroke 800mm

About the Supplier

This supplier has been audited by TÜV Rheinland. Verify the report on the official TÜV Rheinland website with ID "MIC-ASR254978". Items marked "verified" are certified.

Watch Video
Watch Video
Wuxi Hongba Mechanical Electrical Equipment Co., Ltd.
Wuxi Hongba Mechanical Electrical Equipment Co., Ltd.
Wuxi Hongba Mechanical Electrical Equipment Co., Ltd.
Wuxi Hongba Mechanical Electrical Equipment Co., Ltd.
Wuxi Hongba Mechanical Electrical Equipment Co., Ltd.
Wuxi Hongba Mechanical Electrical Equipment Co., Ltd.
Wuxi Hongba Mechanical Electrical Equipment Co., Ltd.
Wuxi Hongba Mechanical Electrical Equipment Co., Ltd.

About Our Factory & Business Background

verified Business Type
Manufacturer/Factory & Trading Company
Address
No.5 LiJiang RD, Xinwu district, Wuxi, China
verified Plant Area
22640 square meters
verified Number of Employees
189
verified Registered Capital
31,930,000 RMB
verified Terms of Payment
LC, T/T, D/P, PayPal, Western Union, Small-amount payment
verified International Commercial Terms(Incoterms)
FOB, CIF, CFR, EXW
verified Average Lead Time
Peak Season Lead Time: within 15 workdays
Off Season Lead Time: within 15 workdays
verified Nearest Port
Shanghai Port
verified Minimum Order Quantity
1 Set
verified Supply Chain Partners
87

Our Production Capability & Technical Expertise

verified Main Products
Linear Actuator
verified Production Lines
1
verified Production Machines
Drilling machine, Punching machine, Shrink mouth machine, CNC lathe, Assembly line, Motor assembly line
verified QA/QC inspectors
7 people
verified Inspection Type for Finished Products
100% inspection(Visual inspection & Function inspection)
verified Inspection Method for Finished Products
Have instructions and uniformly followed
verified Customization Options
Customization from Samples, Customization from Designs, Full Customization, Minor Customization, Flexible customization
verified R&D Engineers
28 people
verified Traceability of Raw Materials
Yes
verified Own Brand
Yes

Our Industry Experience & Global Business Record

verified Year of Establishment
2008-02-25
verified Export Year
17 Years
verified Main Markets
North America, South America, Europe, Southeast Asia/ Mideast, Africa, East Asia(Japan/ South Korea), Australia, Domestic, Chinese Taiwan
verified Repeat Buyers Choice
80%~100%
verified Number of Foreign Trading Staff
21
verified Overseas Agent/Branch
No
verified New Products Launched in Last year
Yes

Our Certifications, Standards & Industry Recognition

verified Management System Certification
ISO9001:2015
verified Cooperated with Fortune 500
No

Send your message to this supplier

Contact Information
Recipient
Message

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now