|
Still deciding? Get samples of $ !
Request Sample
|
| Customization: | Available |
|---|---|
| Certification: | ISO, CE |
| IP Rating: | IP66 |
Industry-leading Audited Factory
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Features:
| 1-1 Transmission parameters of the codes | ||||||||
| Code | VDC | No-load speed mm/s |
No-load Current A |
Load(push/pull)KN | Speed with load mm/s |
Current with load A |
single hall pulse/m | |
| 1 pairs of poles | 4 pairs of poles | |||||||
| A | 24V | 1.6 | 1.3 | 20 | 1.3 | 3.6 | 25.2 | 100.8 |
| B | 24V | 1.2 | 1.3 | 20 | 1 | 4 | 37.998 | 151.992 |
| 2-1 Product Selection Guide | |||||||||
| Voltage | Speed | Stroke | Install Dimension |
Rated Load |
Front end |
Rear End |
Cable Lenth |
Cable end |
Hall |
| 24VDC | |||||||||
| 1.2mm/s | |||||||||
| 1.6mm/s | |||||||||
| 150mm-1200mm | |||||||||
| L(See 4-1,4-2) | |||||||||
| 20000N | |||||||||
| ∅25 rod end knuckle bearing | |||||||||
| customize | |||||||||
| See 4-1,4-2 | |||||||||
| 1M | |||||||||
| 1.5M | |||||||||
| 2M | |||||||||
| customize | |||||||||
| Bonding tin bare wire(can customize connectors ) | |||||||||
| No hall sensor | |||||||||
| 2 hall sensors | |||||||||
| Main test items and reference standards | |||||||||
| No. | Test items | Standards | Notes | ||||||
| 1 | Simulated load life test | HB FACTORY STANDARD | 20KN load, stroke 1m, duty cycle 30%, life test | ||||||
| 2 | Temperature cycling test | IEC60068-2-14 | Low temperature: - 40 ºC± 2 ºC, high temperature: 65 ºC± 2 ºC, high and low temperature for 1 hour, 50 cycle times, full load. | ||||||
| 3 | Temperature shock test | IEC60068-2-14 | Low temperature: - 40 ºC± 2 ºC, high temperature: 65 ºC± 2 ºC, 100 cycles. | ||||||
| 4 | Humidity storage test | IEC60068-2-3 | Temperature 65 ºC± 2 ºC, temperature 95 ± 2% RH, 144H | ||||||
| 5 | High temperature operation test | IEC60068-2-2 | High temperature 65 ºC, load test | ||||||
| 6 | Low temperature test | IEC60068-2-1 | (- 40 ºC± 2 ºC) storage time 48 hours; full load operation | ||||||
| 7 | Mechanical vibration test | IEC60068-2-6 | Sine wave, 10Hz ~ 200Hz (logarithmic sweep) scanning cycle 300s, test time 8h | ||||||
| 8 | Salt spray test | GB/T242317-2001 | The appearance salt spray test needs more than 500h (NSS) | ||||||
| 9 | Protection level test | GB4208-93 | The waterproof test box shall be used according to gb4208-930 standard of shell protection grade | ||||||
| 10 | Static load test | HB FACTORY STANDARD | Use pressure sensor, industrial computer, cylinder test. | ||||||
| 11 | Cable thermal aging | GB2951.11-2008 | The change of tensile strength and elongation is less than 15% | ||||||
| 12 | Low temperature winding of cable | GB2951.14-2008 ( 8.1) |
(- 40 ºC), 4h after immersion in water 1000VAC / 5m, no breakdown | ||||||
| 13 | UV resistant | TOV2pfg1169-2007 | 60 ± 2W / m2, 300-400nm, 720h ,no crack |
||||||
){kind=link}